It is very normal to have a balance weight on the wheel hub, even a new car is no problem. Maybe some friends may have said it, if you talk nonsense, my car does not have a balance weight. In fact, it's not that there is no, but some balance weights are attached to the bright part of the wheel hub, and some are attached to the dark part of the wheel hub. Those friends who say there is no belong to the second situation.
The function of the balance weight is to make the wheel achieve dynamic balance, because with the current processing technology, it is difficult for the wheel hub and the tire to be 100% round. Moreover, no matter what material or process is used to make wheels or tires, although they look uniform to the naked eye, they are actually uneven in quality, that is, some places are heavy and some are light.
If such wheels and tires are directly mounted on a car, the driver may not feel anything at a slower speed, but once the speed is increased, the jitter from the steering wheel can be clearly felt. This is caused by uneven wheel weight. Drivers and passengers bring discomfort. If you do not make adjustments for a long time, it will also cause uneven tire wear, and even more serious damage to the suspension system, the driving safety will be affected at that time.
You may not know that using balance weights to achieve dynamic balance of wheels is actually the last step. As early as when tires and wheels are combined, manufacturers have already considered dynamic balance.
After the tire is produced, a dot will be marked. Most of this dot is yellow. The position of this dot is the lightest part of the tire. Then, there is a place in the hub where the valve core needs to be installed, so the position for installing the valve core is heavier than other places. Aligning the lightest part of the tire with the heaviest part of the wheel hub, the valve, can keep the weight of each part of the wheel as even as possible.
