The lead weight installed on the car tire is also called the balance weight, which is an indispensable part of the car tire. The main purpose of installing the balance weight on the tire is to prevent the tire from vibrating under high-speed operation and affecting the normal driving of the vehicle. This is what we often call tire dynamic balance.
The tire balance weight is a counterweight component installed on the wheels of the vehicle. It is to ensure that the wheels maintain a balanced state under high-speed rotation, so that the vehicle runs stably and the driver and passengers are comfortable. There are two installation methods, one is attached to the inner ring of the rim, the other is externally hung on the outer edge of the rim. The main function of the balance weight is to keep the wheels in dynamic balance while rotating at high speed.
The wheel of a car is a whole composed of tires and rims. However, due to the manufacturing process, the mass distribution of each part of the whole cannot be very uniform. When the wheels of a car rotate at a high speed, it will form a dynamic imbalance, causing the wheels to shake and the steering wheel to vibrate during the driving. In order to avoid this phenomenon or eliminate this phenomenon that has occurred, it is necessary to make the wheel in a dynamic situation by increasing the counterweight method to make the wheel correct the balance of each edge part. The process of this correction is the dynamic balance of the wheels.
The balance weight generally does not fall off. Usually, when the balance weight needs to be adjusted, most of them are after we puncture and repair the tire. Strictly speaking, as long as the tire is removed, we need to perform dynamic balance, such as changing a new tire or repairing a tire All have to be dynamically balanced. At this time, use a balancer to test the balance of the tires and wheels under sports conditions, use balance weights at unbalanced points, and replace the usual tire alignment. Our common models are currently front-wheel drive For car models, the front wheel load is greater than the rear wheels. After a certain mileage of the car, the tires of different parts will have different fatigue and wear levels. Therefore, it is necessary to change the tires in a timely manner according to the mileage or road conditions. Also need to adjust the balance weight.