Introduction The Special Process Of Adhesive Wheel Balance Weight

Generally speaking, stick-on iron balance weights can be applied to any car model, are galvanized and spray-coated, and comply with environmental protection and anti-corrosion standards.

Adhesive wheel balance weight, the block is made of Fe, and the tapes are available in 3M, Norton, blue tape, red tape, yellow tape and other varieties, suitable for use in various environmental requirements. The surface can be electrostatic sprayed, epoxy resin sprayed, galvanized, etc., and customers can choose according to their needs.

Fe stick on wheel balance weight specifications: 5gx4+10gx4 ; 5gx12 ; 1/4ozx12 ; 1/2ozx6 ; 1ozx4

Pls check out the benefits as below:

1. The weight error is extremely small, and it uses double-sided tape to stick firmly.

2. Dynamic balancing does not damage the rim and is beautiful.

3. The heavy block has clear engraving, fine craftsmanship and neat appearance.

4. It can be cut into various specifications at will, which is widely applicable and brings convenience to dynamic balancing.
5. Lead(Pb free),environment friendly.

Welcome inquiry if you are interested！