| Item： | Universal Car Tire Sensor |
| Model No.: | TP01 |
| Material: | EPDM Rubber & Metal |
| Package: | 1 pc/box, 500 boxes/case |
| Customized Packaging: | Accept |
| Used For: |
Internal Sensor for Autel programmer
|
Valve stem pressure sensor: stable quality, high sales, reliable after-sales service, worth buying.
The diamension of valve stems is universal for all kinds of wheels.
● Snap-in design, easy to carry and use, and easy to install.
● 100% leakage tested valve stems.
● Integrated Circuit, Stable Monitoring
● With MAXWELL battery, durable about 3 years
● 315&433 frequency bands are applicable
● Copper base design, can withstand more atmospheric pressure
● Fully inspected by factory, no worry about quality
1. Packing can be customized.
2. The goods can be deliveried about 5-15 days according to your requirement.
Which is better rubber or aluminum TPMS sensors valve stems?
In terms of durability, aluminum alloy valves are better because aluminum is not easy to oxidize, and rubber valves will age over time. However, from the perspective of use, rubber valves are better. Since the rubber valve stem is integrally formed, it has better airtightness, and the aluminum alloy base has threads for installing built-in tire pressure monitoring.
Car owners who pay special attention to the market will find that most vehicles on the market are basically rubber valves. According to relevant industry experience, there is generally not much difference between rubber valves and aluminum alloy valves in terms of use angles, and the seals are basically made of rubber. Therefore, rubber valves are more widely used than the previous year and can be applied to most wheels, while aluminum valves are mostly replaced later.
Accurately identify the quality of the valve.
After purchasing the valve, make a basin of water first, and then put the valve in the water. If the valve bubbles after being put into the water, it means that the valve quality is not good.
On the contrary, if there is no bubbling, the valve quality is qualified. If the valve is found to be leaking, it should be repaired or replaced with a new part immediately. The valve core is twisted off with a hard twist. More importantly, before inflating the tire, it is best to use an air gun to clean the dust around the valve mouth and valve core to prevent dust from entering the inner tube.
At the same time, the valve cap is also very important. Its function is to isolate the air, prevent dust, water, oil, etc. from damaging the valve core sealing rubber, and extend the service life of the valve core. It is best for car owners to regularly maintain the valve and valve cap to maintain the air tightness of the tire, extend the service life of the tire, and maintain accurate tire pressure.
Hot Tags: universal car tire sensor, China universal car tire sensor manufacturers, suppliers, factory, Tire Valve, Tubeless Tire Patch, Tire String, Tubeless Metal Tire Valve, quick car jack, valve stem caps
